MECHANICAL ENGINEER | ANZSCO 233512

WHAT DOES A MECHANICAL ENGINEER DO?

A Mechanical Engineer under ANZSCO 233512 plans, designs, organises and oversees the assembly, erection, commissioning, operation and maintenance of mechanical and process plant and installations. The occupation sits within ANZSCO Unit Group 2335, Industrial, Mechanical and Production Engineers, alongside Industrial Engineer and Production or Plant Engineer, and carries a Skill Level 1 rating in Australia. Registration or licensing may be required depending on the specific role and jurisdiction.

Typical day to day duties include:

• Planning and designing mechanical and electromechanical products, systems and equipment for industrial and commercial applications
• Overseeing and coordinating the fabrication, installation, operation and maintenance of mechanical plant and equipment
• Preparing detailed engineering drawings, specifications and calculations for mechanical systems
• Conducting feasibility studies and preparing cost estimates for mechanical engineering projects
• Investigating mechanical equipment failures and recommending design or maintenance improvements
• Supervising the commissioning and testing of mechanical plant and equipment to confirm compliance with design specifications
• Ensuring mechanical designs and installations comply with relevant Australian Standards and safety regulations

SUBCLASS 482 FOR MECHANICAL ENGINEERS – CSOL LIST

The Subclass 482 Skills in Demand visa replaced the older Temporary Skill Shortage visa in December 2024, and a new occupation list came with it. The Core Skills Occupation List, known as the CSOL, brought together the previous strategic skills lists into one single list covering several hundred occupations across professional, trade and technical fields.

Mechanical Engineer sits on the CSOL under the code ANZSCO 233512, alongside closely related roles within the same unit group such as Industrial Engineer and Production or Plant Engineer. This is the code an employer nominates against for a Core Skills stream 482 visa, and it is also the same code used where the occupation applies to the Direct Entry stream of the Subclass 186 Employer Nomination Scheme.

SUBCLASS 482 ANZSCO REQUIREMENT FOR MECHANICAL ENGINEERS

Your nominated occupation has to genuinely reflect the work you will actually be doing for your sponsoring employer. The Department looks past job titles and checks the duties set out in your nomination against the ANZSCO definition for 233512.

If the role on paper is genuinely focused on workforce, process and operational efficiency rather than the mechanical design, assembly and commissioning of plant and equipment, the nomination may need to be assessed against the related but distinct occupation of Industrial Engineer instead, or Production or Plant Engineer if the focus is on production plant supervision specifically. Getting the occupation description right at this stage matters, since Engineers Australia reviews the specific engineering discipline reflected in the qualification and employment evidence.

ANZSCO requirement for Mechanical Engineers includes a Bachelor degree or higher qualification, with registration or licensing potentially required depending on the specific role (ANZSCO Skill Level 1).

SC 482 VISA REQUIREMENT FOR MECHANICAL ENGINEERS

To be granted a Subclass 482 visa under the Core Skills stream as a Mechanical Engineer, applicants generally need to meet the following:

• A genuine, approved sponsor. Your employer, typically a mining company, manufacturer or engineering consultancy, must be an approved Standard Business Sponsor, or in the process of becoming one
• An approved nomination for ANZSCO 233512, with a salary at or above the Core Skills Income Threshold and the market rate for the role
• A positive Engineers Australia skills assessment, confirming your qualification and competencies meet the required engineering standard
• English requirements as outlined further below, unless an exemption applies
• A clear health examination through an approved panel physician
• Police clearance certificates from every country lived in for twelve months or more

The Core Skills Income Threshold, which sets the minimum salary an employer must offer for a Core Skills stream nomination, is indexed and reviewed every year, so it is always worth checking the current figure on the Home Affairs website before a nomination is lodged. The visa itself can be granted for a period of one to four years, depending on individual circumstances, and a partner and dependent children can be included as secondary applicants.

SUBCLASS 482 VISA APPLICATION CHARGES

Visa application charges are indexed and change from 1 July each year. The government charges are structured as a base charge for the main applicant, a matching charge for each adult dependent aged 18 or over, and a reduced charge for each dependent child under 18. Because these figures move every financial year, it is worth confirming the current charge on the Home Affairs website at the time of lodgement rather than relying on a figure from a previous year, and budgeting separately for any nomination fee, the Skilling Australians Fund levy paid by the employer, and the Engineers Australia skills assessment fee.

SKILLS ASSESSMENT REQUIREMENT FOR MECHANICAL ENGINEER – SUBCLASS 482 SKILLS IN DEMAND (SID) VISA

Engineers Australia is the designated assessing authority for Mechanical Engineer (ANZSCO 233512), not VETASSESS.

Applicants with a Bachelor of Engineering accredited by Engineers Australia, or a qualification from an institution in a country that is a full signatory to the Washington Accord, the Sydney Accord or the Dublin Accord, can generally proceed through a qualification based pathway. Applicants with other qualifications, including non accredited qualifications or those relying substantially on experience, generally need to complete a Competency Demonstration Report, commonly referred to as a CDR, addressing Engineers Australia's stage one competency standards through three career episode reports, a summary statement and a continuing professional development statement.

A positive Engineers Australia skills assessment outcome does not expire, though the assessment result itself is generally only accepted as current for visa purposes for three years from the date of issue.

The Engineers Australia assessment pathway generally works as follows:

• Pathway A: applicants with an accredited Australian qualification, or a qualification from a Washington Accord, Sydney Accord or Dublin Accord signatory country, follow a qualification based assessment
• Pathway B: applicants with other qualifications, or those relying substantially on experience, generally need to prepare a Competency Demonstration Report addressing Engineers Australia's stage one competencies for professional engineers
• Both the level and the relevance of the qualification's field of study to Mechanical Engineer are assessed together with the applicant's claimed employment history

Applicants should provide comprehensive documentary evidence, including:

• Certified copies of academic transcripts and qualification documents
• Employment reference letters, employment contracts, payslips and taxation records supporting the claimed employment
• For CDR pathway applicants, three career episode reports, a summary statement and a continuing professional development statement addressing Engineers Australia's competency standards
• Identity documents and any other supporting material specified in Engineers Australia's current application guidelines

Because the Competency Demonstration Report pathway involves detailed technical writing against specific competency standards, applicants relying on this pathway should allow more preparation time than those eligible for the qualification based pathway.

SUBCLASS 186 FOR MECHANICAL ENGINEERS – EMPLOYER NOMINATION SCHEME

The Subclass 186 Employer Nomination Scheme is Australia's main permanent employer sponsored visa, and for many Mechanical Engineers already working in Australia on a 482 visa, it is the natural next step. The Direct Entry stream is the relevant pathway for applicants who have not yet worked long enough with their employer to qualify for the Temporary Residence Transition stream, or who are applying from outside Australia altogether.

Unlike the 482, a grant under the 186 gives the applicant and their family permanent residency from the day it is approved, with no further visa renewals needed.

SC 186 VISA REQUIREMENT FOR MECHANICAL ENGINEERS

For the Direct Entry stream, applicants generally need to meet the following:

• A nomination from an approved Australian employer for a genuine, full time, ongoing position as a Mechanical Engineer
• A salary that meets or exceeds the relevant income threshold and the market rate for the role
• A positive Engineers Australia skills assessment that is current at the time of application
• At least three years of relevant work experience, unless exempt from the skills assessment and experience requirements
• Being under 45 years of age at the time of application, with limited exemptions
• Competent English, at an overall IELTS score of 6.0 with no band below 6.0, or an accepted equivalent
• Health and character clearances

This is a noticeably higher bar than the 482, both on English and on work experience, which is one reason many Mechanical Engineers use the 482 as a stepping stone before applying for the 186.

SKILLS ASSESSMENT REQUIREMENT FOR MECHANICAL ENGINEERS – SC 186 VISA

A positive Engineers Australia skills assessment is required for Direct Entry 186 applicants in this occupation, and it needs to be current, generally issued within the last three years, at the time the visa application is lodged.

The same qualification based and Competency Demonstration Report pathways described above apply here. Because the Direct Entry stream also requires three years of relevant experience, it helps to start gathering employment evidence, reference letters and, where relevant, career episode material well before applying, since the CDR pathway in particular can take time to prepare properly.

ENGLISH LANGUAGE REQUIREMENTS

Every skilled or employer sponsored visa in Australia comes with an English language test, and the score needed depends on which visa is being applied for. For Mechanical Engineers looking at the 482 and 186 pathways, the bar is different at each stage, which catches a number of applicants off guard.

For the Subclass 482 Skills in Demand visa, Core Skills stream, applicants generally need Competent English, which works out to an overall IELTS score of 5.0 with no band below 5.0, or an accepted equivalent test result.

For the Subclass 186 Employer Nomination Scheme, Direct Entry stream, the standard is higher. Competent English here means an overall IELTS score of 6.0 with no band below 6.0. Where mandatory licensing or registration applies to a specific engineering role, applicants generally need to meet whichever English standard is higher, the visa requirement or the level needed for that registration.

EXEMPTIONS ON ENGLISH LANGUAGE REQUIREMENTS

Citizens of the United Kingdom, the United States, Canada, New Zealand and the Republic of Ireland are generally exempt from formal English testing, along with applicants who have completed a set period of study conducted in English. Test results typically need to be current within three years of lodgement, so if a score is getting old, it is worth sitting the test again before applying rather than finding out partway through processing.

REGISTRATION AND LICENSING IN AUSTRALIA (MECHANICAL ENGINEER)

A positive Engineers Australia skills assessment and an approved visa get an applicant through the migration process, but they do not automatically confer the right to use a protected title such as Chartered Engineer, or to practise in roles where state based professional engineer registration is legally required. Registration requirements for engineers differ across Australian states and territories, and some jurisdictions, including Queensland and Victoria, require professional engineers to be registered before offering certain engineering services to the public.

Many mechanical engineers pursue Chartered status with Engineers Australia, known as becoming a Chartered Professional Engineer, which is a recognised professional credential based on demonstrated competency and can meaningfully lift earning potential. It is worth confirming the specific registration requirements for the state or territory and type of engineering work involved before starting work, since this sits outside the migration process itself.

SALARY EXPECTATIONS IN AUSTRALIA

Pay for Mechanical Engineers is generally strongest in the mining, oil and gas and aerospace sectors, where the technical demands and remote or specialised nature of the work command a premium. Engineers who achieve Chartered Professional Engineer status, take on project management responsibilities, or build ten or more years of experience in high demand sectors typically see the largest step up in earning potential in the profession.

WHY MECHANICAL ENGINEERS ARE IN DEMAND IN AUSTRALIA

• Australia's mining, oil and gas sectors rely heavily on mechanical engineers for plant design, commissioning and equipment reliability across remote and often large scale operations
• Manufacturing and infrastructure projects continue to require mechanical engineering input for plant design, HVAC systems and industrial equipment
• Growth in renewable energy, battery manufacturing and defence shipbuilding programs has created new demand for mechanical engineering expertise across emerging industries
• Local engineering graduate numbers in mechanical engineering have not kept pace with the scale of Australia's current industrial and resources pipeline
• The inclusion of Mechanical Engineer on the Core Skills Occupation List reflects this recognised, ongoing shortage of qualified mechanical engineers at a national level

EMPLOYER SPONSORSHIP FOR MECHANICAL ENGINEERS IN AUSTRALIA

Australian mining companies, manufacturers and engineering consultancies can sponsor overseas Mechanical Engineers through the Skills in Demand (Subclass 482) visa, the Employer Nomination Scheme (Subclass 186) visa, and other eligible employer sponsored visa pathways when suitably qualified Australian workers are unavailable. With ongoing demand for qualified mechanical engineers, employer sponsorship has become an important way for these organisations to recruit experienced overseas engineers and support critical industrial and resources projects.

At Migration Republic, we assist employers with every stage of the employer sponsorship process, including Standard Business Sponsorship applications, labour market testing where required, nomination applications, visa lodgements, and ongoing sponsorship compliance. Our Registered Migration Agents make sure your business meets all Department of Home Affairs requirements while keeping the sponsorship process as straightforward as possible, and can work alongside your Engineers Australia skills assessment process where needed.

Whether you need to sponsor a Mechanical Engineer for a mining company, a manufacturer, or an engineering consultancy, we can help you identify the most suitable employer sponsored pathway. We work with businesses of all sizes across Australia, helping employers sponsor skilled mechanical engineers under the Subclass 482 Skills in Demand visa and secure permanent residence pathways through the Subclass 186 Employer Nomination Scheme, where eligible.

We help employers with:

• Standard Business Sponsorship applications
• Sponsoring overseas Mechanical Engineers under the Skills in Demand (Subclass 482) visa
• Employer Nomination Scheme (Subclass 186) applications
• Labour Market Testing
• Employer nomination applications
• Employer sponsorship compliance obligations
• Permanent residency pathways for sponsored mechanical engineers

If your business is looking to sponsor a Mechanical Engineer in Australia or recruit a skilled overseas mechanical engineering professional, Migration Republic can provide expert advice and manage the visa side of the process from start to finish, working alongside your Engineers Australia skills assessment pathway.

Interactive Tools

Calculate Points & Check Your Visa Eligibility

Use our interactive self-service migration tools to calculate your points score, test your eligibility, and discover your potential Australian visa options instantly.

HOW MIGRATION REPUBLIC CAN HELP YOU

Migrating to Australia as a Mechanical Engineer means navigating an Engineers Australia skills assessment, confirming you are applying under the correct occupation code rather than Industrial Engineer or Production or Plant Engineer, and two visa pathways with different English and experience thresholds. Our registered migration agents at Migration Republic handle this every day, and we can help you get it right the first time.

Here's what we take care of for you:

• Confirming that ANZSCO 233512 genuinely matches your qualifications and day to day duties
• Understanding whether you qualify for the qualification based pathway or need a Competency Demonstration Report
• Structuring your employment references and career episode material so they meet Engineers Australia requirements
• Comparing the 482 and 186 pathways to find the right fit for your circumstances
• Managing your full visa application from lodgement through to grant

Frequently Asked Questions – Employer Sponsorship for Mechanical Engineers